The "Conconi test" is a noninvasive field test to determine the anaerobic threshold, based on an observed deviation from the linear heart rate (here FC) vs. running speed (RS) curve at high RS. The title of this article reports a "pseudo" before "Conconi test" because the protocol suggested by Conconi et al. ("The Conconi test: methodology after 12 years of application" - Centro Studi Biomedici Applicati allo Sport, Università degli Studi di Ferrara, Italy - Oct. 1996) is slightly different, but the main attempt is just to describe a method that can be used by any runner that owns a Heart Rate Monitor, a Chrono and a measured stretch of road.
The simplified method used here has the following protocol:
- 20 minutes warm-up
- 5 minutes stretching
- using a 1000 m ring, the athlete increases his speed every 500 m
- when the athlete is unable to continue the session stops (the athlete should complete between 2.5 and 4 km before being unable to continue)
- 20 minutes cool-down (optional).
At the end of the test two types of graphs can be plotted: the first one represents the FC vs. time and the RS vs. time together, as shown below.
 |
| FC and speed vs. time. |
The detail of the previous plot is shown in the next figure, where the distance references are highlighted.
 |
| FC and speed vs. time: detail. |
Zooming on the top of the red curve (FC), the FCmax can be easily read.
 |
| FCmax: detail. |
But the most important graph is the following. Plotting FC vs. RS the anaerobic threshold can be determined finding the deflection point, where there is a deviation from the linear FC vs. RS curve. The meaning of this knee is simple: when linearity stops, the accumulation of lacitc acid (LA) starts. The higher the threshold, the higher the RS without accumulation of LA. Thus you can find the anaerobic threshold for FC (AFC - Anaerobic Heart Rate) and for the speed (ARS - Anaerobic Running Speed).
 |
| Graphic method to determine the anaerobic threshold. |
The accuracy of this method, anyway, is strictly connected with the accuracies of the instruments employed and with the human and environmental boundary conditions. Anyway, this is for sure a good tool to understand the orders of magnitude of the variables used. As Claude Rouelle taught me: "Is it going to be accurate? No. Is it going to be useful? Yes!".
Here there is a table to quickly understand how to use the results (values can slightly change with athletes: this is working for me and it's just the explanation of a method):
KIND OF TRAINING
|
SPEED
|
Recovery long
|
Lower than 78% of ARS
|
Slow
|
Between 80 and 82% of ARS
|
Long
|
Between 87 and 90% of ARS
|
Medium
|
Between 92 and 95% of ARS
|
Fast
|
Between 97 and 100% of ARS
|
Medium repetitions
|
Between 97 and 100% of ARS
|
Short repetitions
|
Between 105 and 108% of ARS
|
Posts about training:
- Runner's performance evaluation - Part 1: the VO2max.
- Runner's performance evaluation - Part 2: Carbs, Fats and Proteins as Energy for living.
- Runner's performance evaluation - Part 3: Energy expenditure during running.
- Motivation for training: two inspirational speeches by John Doman.
- A pseudo-"Conconi test" to predict the anaerobic threshold
- Running at 4000 m: the hypoxic chamber
- My 2011 in numbers - Happy new year!
- Omni-Lite ceramic track spikes
Posts about races:
- BIG 25 Berlin 2012: a new World Record!
- The hardest 400 m of the World: the "Red Bull 400"
- Trail running in the dark: 4^ Notturna di Sant'Antonio - Miane (TV), Italy
- Talkin' blues: when XC meets life. Offene Berlin-Brandenburgische Crossmeisterschaften
- "Non Solo Sport Race" - Padova, 28th August 2011
Keep on training!